|
|
|
|
|
AQUATIC CUSTOM
COVERS
CUSTOM MADE THERMAL COVER FOR
YOUR SPA
|
-
In
addition to the standard two straps, you may
have as many straps as needed for
a minimal charge. These can be
placed wherever is best for your
cover.
-
If
you have the need for an extra
weight bearing cover, we can add
metal strips to the foam pieces,
running from the fold to the outer
edges. These strips will be an
additional charge.
-
If
your spa has knobs above the top
edge which would require a cut out
in the cover to allow the cover to
sit flat upon the edge, we can make
them for whatever size is necessary,
for an additional charge.
-
We
also can make an approved safety
cover which will have extra
qualities capable of supporting 300
pounds of weight. Price will vary
depending on the size.
-
Another
available option is a cover which
has frp board laminated to the foam.
This enables the cover to have a
harder, stronger surface on the top.
-
If
your vinyl skin is still good, but
the foam inserts have been broken or
water absorption has made them too
heavy, we can make the foam
inserts only for you.
-
If the
vinyl skin has been damaged, but the
foam inserts are still usable, we
can make only the vinyl skin
for you.
-
Our
standard skirt is 2" in width.
Wider skirts can be made to suit
your tub.
|
|
|
